Theory of curve-surface conjugated and method of teeth surfaces constructed

doi:10.3901/JME.2012.19.017

	Theory of curve-surface conjugated and method of teeth surfaces constructed
其他题名	Theory of Curve-surface Conjugated and Method of Teeth Surfaces Constructed
	Chen, Bingkui 1; Yi, Wencui1,2 ; Zhong, Hui 1; Tan, Rulong 1
	2012-10-05
发表期刊	Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
ISSN	0577-6686
卷号	48 期号:19 页码:17-22
摘要	The concept of curve-surface conjugated meshing is defined as that a smooth curve always maintaining continuous and tangent contact with a smooth surface on two bodies with given motions respectively. A general method which generates the conjugated meshing curve-surface by the engagement pair with the conjugate tooth surfaces is presented. A tubular surface is generated which conjugated contact with its conjugated tooth surfaces. A new tooth profile generation method is proposed. The tubular enveloping surface is generated by a sphere with an appropriate radius following a given equidistant-curve of the meshing curve; the equations of the tubular surface and the contact curves are derived; the conditions of the conjugated curves and the radii of the conjugated surfaces are presented. Based on this method and the theoretical derivations, the forming theory of the tubular conjugate tooth surfaces regarding the conjugate curve as the ridge line is established. An application for the cycloid planetary transmission is presented. The helical tube tooth profile of cylindrical pin tooth is constructed and the characteristics of curve-surface conjugated cycloid planetary transmission are discussed. The results show that the curve-surface conjugated has the property of point-contact. The nearly pure rolling engagement can be obtained by applying appropriate cure-surface conjugated pair which has the small sliding ratio and the high transmission efficiency. © 2012 Journal of Mechanical Engineering.
关键词	Point contacts Curve surface Enveloping surface Equidistant curves Gear geometry High transmission Planetary transmission Theoretical derivations Tooth profile
DOI	10.3901/JME.2012.19.017
URL	查看原文
收录类别	EI ; PKU ; ISTIC
语种	中文
出版者	Chinese Mechanical Engineering Society
EI入藏号	20124815723973
EI分类号	602.2 Mechanical Transmissions ; 704.1 Electric Components
原始文献类型	Journal article (JA)
文献类型	期刊论文
条目标识符	https://ir.cqcet.edu.cn/handle/39TD4454/2961
专题	智能制造与汽车学院
作者单位	1.The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400030, China; 2.Chongqing College of Electronic Engineering, Chongqing 401331, China
推荐引用方式 GB/T 7714	Chen, Bingkui,Yi, Wencui,Zhong, Hui,et al. Theory of curve-surface conjugated and method of teeth surfaces constructed[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2012,48(19):17-22.
APA	Chen, Bingkui,Yi, Wencui,Zhong, Hui,&Tan, Rulong.(2012).Theory of curve-surface conjugated and method of teeth surfaces constructed.Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,48(19),17-22.
MLA	Chen, Bingkui,et al."Theory of curve-surface conjugated and method of teeth surfaces constructed".Jixie Gongcheng Xuebao/Journal of Mechanical Engineering 48.19(2012):17-22.